HALO Polar AC3000 WL-WN551K3 is a tri-band wireless router designed to provide high-speed and stable internet connectivity to a large number of devices in a home or office setting. The AC3000 refers to its maximum theoretical data transfer rate of 3,000 Mbps, which is achieved through the use of three separate frequency bands: one 2.4GHz band with a maximum speed of 400Mbps, and two 5GHz bands with a maximum speed of 1,300Mbps each.
The router also features advanced security measures to protect your network from unauthorized access and cyber threats. This includes WPA/WPA2 encryption, a built-in firewall, and parental controls that allow you to restrict access to certain websites or content.
Follow the given steps for AC3000 WL-WN551K3 Tri-band Setup
- Unbox the router For AC3000 WL-WN551K3 Tri-band Setup and connect the power adapter to it. Then, plug the adapter into a power source and turn on the router.
- Connect your PC or laptop to the router’s LAN port using an Ethernet cable.
- Open a web browser on your device and enter the router’s IP address 192.168.10.1 in the address bar. Then press Enter.
- You’ll be asked to type in the standard username and password. Click Login after entering “admin” for both the username and password.
- Once you are logged in, you will be prompted to change the default login credentials. Follow the on-screen instructions to set up a new username and password.
- Next, select the Internet connection type. If you have a DSL connection, select PPPoE. If you have a cable connection, select DHCP.
- Configure your wireless settings. Set the SSID (network name) and password for your Wi-Fi network. Choose the appropriate security protocol (WPA2 is recommended).
- Restart your router after saving your settings.
- Once your router is restarted, connect your wireless devices to the Wi-Fi network using the SSID and password you set up.
Congratulations, Your AC3000 WL-WN551K3 Tri-band Setup is successfully done
If you are facing any kind of issue during AC3000 WL-WN551K3 Tri-band Setup feel free to contact us we are here for your help
How to Reset AC3000 WL-WN551K3 Tri-band?
Resetting your router will erase all of your custom settings, including your Wi-Fi network name and password. Make sure to reconfigure your router with your preferred settings after resetting it.
To reset the AC3000 WL-WN551K3 Tri-band router, you can follow these steps:
- On the router’s back, look for the reset button. Reset or recessed reset may be written on the label.
- With the router powered on, press and hold the reset button for 10-15 seconds using a paperclip or similar object. The router’s lights should flash briefly to indicate that the reset has begun.
- Wait for the router to reboot before releasing the reset button. This could take a while.
- The router will reboot and return to its factory default settings afterward. The default username and password, which are typically “admin” and “password,” can then be used to log in.
Why do we need to reset the AC3000 WL-WN551K3 Tri-band?
There are several reasons why you may need to reset the AC3000 WL-WN551K3 Tri-band router:
- Troubleshooting: If you’re experiencing connectivity issues or other problems with your router, resetting it may help to resolve the issue.
- Security: If you’re concerned that your router has been compromised or hacked, resetting it can help to secure your network and protect your devices.
- Configuration changes: If you’ve made changes to your router’s settings and are experiencing problems as a result, resetting the router can help to restore the default settings and resolve the issue.
- Upgrades: If you’re upgrading the firmware on your router, resetting it may be necessary to ensure that the new firmware is properly installed and functioning.
If you are facing any kind of issue during AC3000 WL-WN551K3 Tri-band Setup feel free to contact us we are here for your help
